Jazz 1100 Mains Fed Water Cooler Dispenser | Freestanding

Jazz 1100 Mains Fed Water Cooler Dispenser.

AVAILABLE AS:

• Hot and Cold
• Ambient and Cold

COOLING SYSTEM

3 litre stainless steel cold water tank, 18 litres per hour, from 4C – 12C
(depending on influent water temperature).

HEATING SYSTEM

2 litre stainless steel hot water tank, 5 litres per hour, from 87C to 92C,
instant draw off 6 x 7oz cups at above 87C, 15 minutes recovery time.

REFRIGERATION

Hermetically sealed compressor R134a refrigerant.

POWER CONSUMPTION

Compressor: 120 watt when cooling,
Hot tank: 430 watt when heating.

POWER SUPPLY

220 Volt – 50/60 Hz.

CABINET

20 gauge steel with baked on acrylic enamel for easy cleaning,
Moulded, non-scratch and easy cleaning plastic front panels.

DIMENSIONS

Floor standing:

Height: 1015mm
Width: 340mm
Depth: 335mm

Table top:

Height: 550mm
Width: 340mm
Depth: 335mm

Installation Kit Sold Separately

When purchasing a water cooler, it is your duty to make sure that the cooler is kept in a clean and sanitised state to ensure that the water dispensed from the cooler is clean and fit for human consumption.
The water dispensed from these units must be treated as a food substance and therefore must be sanitised and maintained in accordance with food hygiene and EDWCA regulations. Once the cooler has been connected to a potable water supply it should be sanitised and have the correct filter fitted to the Cooler before it can be used. A filter and sanitisation change should be carried out every 6 months for plumbed in machines and 3 months for bottled machines to ensure the quality and cleanliness of the water and water contact parts.
We do provide a self sanitisation kit or alternately you can use a local water cooler supplier to carry this out for you. If you are in the South East or London area, we can provide you with a quote for this service if not a list of approved companies is available through The Water Dispenser & Hydration Association www.twha.co.uk