The WFP9 is great for schools and gyms, drinking fountain has been designed as a bottle & glass filler, to meet the growing demand for bottle filling.
- Allow 50mm clearance all round for proper Ventilation
- Mains water pressure: Min 1 bar, Max 2.5 bar (Always install a pressure reducing valve & water block)
- Turn water supply on & open bubbler & glass filler to purge all air
- Water flow control: bubbler & glass filler are adjustable
- Cabinet: Polished stainless steel
- Bracket: Wall bracket available separately
- Refrigeration system:
- Non toxic, non flammable with R134a refrigerant
- Cooling system & cooling capacity: Direct chill 26 litre per hour to 10°C from incoming water temperature of 20°C and a room temperature of 30°C
- Compressor & condenser: 1/6hp, cooling power 300w. Fan assisted condenser. Side vented
- Power supply: 220/240 Volt, 50 hz
- Dispensing height 210mm
When purchasing a water cooler, it is your duty to make sure that the cooler is kept in a clean and sanitised state to ensure that the water dispensed from the cooler is clean and fit for human consumption.
The water dispensed from these units must be treated as a food substance and therefore must be sanitised and maintained in accordance with food hygiene and EDWCA regulations. Once the cooler has been connected to a potable water supply it should be sanitised and have the correct filter fitted to the Cooler before it can be used. A filter and sanitisation change should be carried out every 6 months for plumbed in machines and 3 months for bottled machines to ensure the quality and cleanliness of the water and water contact parts.
We do provide a self sanitisation kit or alternately you can use a local water cooler supplier to carry this out for you. If you are in the South East or London area, we can provide you with a quote for this service if not a list of approved companies is available through The Water Dispenser & Hydration Association www.twha.co.uk
Reviews
There are no reviews yet.