ProCore/ProCore+ Hot Install Kit Suitable for any system with hot water

All necessary parts have been included to create a generic install kit suitable for all cold/ hot, cold/ ambient/ hot, cold/ sparkling/ hot & cold/ sparkling/ ambient/ hot ProCore & ProCore+ products. This includes T-series and E-series hot models. The kit contains:

Rubber Washer 19mm OD/9mm ID x 3mm EPDM (WRAS Approved)
1/2″ Female x 3/4″ Male Reducing Bush Black
3/4BSPM x 3/8BSPF Adapter
Waterblock (2-30 LPM) Leak Prevention Device 3/4″ BSP x 3/4″ BSPM
Tap Adaptor 3/8″ Push Fit x 3/4″ BSP
3/8″ JG Blue Pipe
Stem Elbow 3/8″ x 3/8″ PF
Shut Off Valve 3/8″ Push Fit
M4 x 12mm Pan Head PoziDriv Machine Screw
3/8″ PF x 5/16″ Stem Reducer
Locking Clip 3/8″
AP3 Filter Head (Premium)
3M Scalegard Ion Exchange Replacement Filter Cartridge (SGP195) – No Bypass
Nut M4 BZP
3.9 x 13 Pozi Pan Self Tapping Screw

When purchasing a water cooler, it is your duty to make sure that the cooler is kept in a clean and sanitised state to ensure that the water dispensed from the cooler is clean and fit for human consumption.
The water dispensed from these units must be treated as a food substance and therefore must be sanitised and maintained in accordance with food hygiene and EDWCA regulations. Once the cooler has been connected to a potable water supply it should be sanitised and have the correct filter fitted to the Cooler before it can be used. A filter and sanitisation change should be carried out every 6 months for plumbed in machines and 3 months for bottled machines to ensure the quality and cleanliness of the water and water contact parts.
We do provide a self sanitisation kit or alternately you can use a local water cooler supplier to carry this out for you. If you are in the South East or London area, we can provide you with a quote for this service if not a list of approved companies is available through The Water Dispenser & Hydration Association www.twha.co.uk